Norman Motorcycles Club
Would you like to react to this message? Create an account in a few clicks or log in to continue.

The Norman Cycles Club is based at the Willesborough Windmill in Ashford Kent, home town to the Norman factory. The motorcycles are rare and we are the only club dedicated to keeping them on the road.


Mk 4 Nippy Villiers parts needed

Norman Motorcycles Club :: Your first category :: Your first forum

Go down

Mk 4 Nippy Villiers parts needed Empty Mk 4 Nippy Villiers parts needed

Post  johnj Wed Apr 14, 2010 3:39 pm

After a lot of heart ache and searching I am down to the short strokes for getting this Mk 4 Nippy on the road. My problem is I need the spring for the gear selector lever on the 3K. Villiers part # is 104 on diagram and actual Villiers number of the part is E.9922. Also the part # 103 on diagram which is the screw for the gear bracket and spring location, actual Villiers part number is E.9912.
I am in Canada and would be more than happy to reimburse for any expenses. This is probably the only Norman Nippy over here.
Contact: johnj at mountaincable dot net

Cheers.

johnj

Posts : 10
Join date : 2009-10-12
Location : Caledonia, Ontario, Canada

Back to top Go down

Mk 4 Nippy Villiers parts needed Empty Re: Mk 4 Nippy Villiers parts needed

Post  johnj Mon May 17, 2010 6:01 am

Got it from Mark Daniels. Kudos to him for helping me out. EACC to the rescue again.

johnj

Posts : 10
Join date : 2009-10-12
Location : Caledonia, Ontario, Canada

Back to top Go down

Back to top

- Similar topics

Norman Motorcycles Club :: Your first category :: Your first forum

 
Permissions in this forum:
You cannot reply to topics in this forum