B2 1952 Wheel Bearings
2 posters
Page 1 of 1
B2 1952 Wheel Bearings
Hallo, where can I buy some new wheel bearings?
B2 DK- Posts : 9
Join date : 2012-07-21
Location : Copenhagen, Denmark
Re: B2 1952 Wheel Bearings
Hi there, any good bearing supplier will be able to help you out, eg simplybearings (google them) etc. Perhaps even without knocking one of the bearings out, you might be able to see some trace of the bearing code number etched on the edge of the bearing somewhere. If not, just get a good digital caliper if you dont have one and measure inner and outer diameters and the width. It could be a metric or imperial size, 1mm equals 40 thousandths of inch, you can calculate from there. Measuring your wheel spindle first will get you pretty close (to within a thou or so if its not too badly worn) to the inner diam. Many of the bearing websites have a 'finder' tool, enter the three sizes and the four digit code for the one you need will pop up. Choose 'normal' C2 clearance bearings . Suitable modern bearings may also be suffixed "2RS" meaning they have black 'rubber' seals on either side. Order these and leave them on if you are confident that nothing will chafe on the seals after installation. I don't know whether you have a 'stepped' or parallel sided spindle on this model, so knocking the spindle out (soft mallet!) may remove just the spindle or the spindle and one of the bearings. If it is parallel sided, bearing removing tools are available to get them out on ebay etc.
Hope this helps
CastrolR- Posts : 4
Join date : 2010-01-30
Similar topics
» New bearings
» Help and Info needed
» My 1958 MK2 Norman Nippy
» rear wheel spindles
» Norman Lido wheel axle sequence
» Help and Info needed
» My 1958 MK2 Norman Nippy
» rear wheel spindles
» Norman Lido wheel axle sequence
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|