My 1958 MK2 Norman Nippy
2 posters
Page 1 of 1
My 1958 MK2 Norman Nippy
I have a Nippy MK2 1958,is there a proper way of adjusting the front wheel as when I pull the brake on the wheel moves to the side. I tried to adjust the spindle nut,but this broke before the wheel stopped moving to the side
the springs are OK
smallbike
the springs are OK
smallbike
smallbike- Posts : 3
Join date : 2013-02-12
front wheel brake
Hi, I am not sure what you mean. On my Nippy there are two long threaded nuts which screw onto the spindle until they butt on the nuts that lock the bearing cones. Then the clamp bolts on the leading links are tightened so that the long threaded nuts cannot turn or move. Therefore the wheel cannot move sideways. if it does I would look at the leading links. There may be a spacer or some washers also on the spindle so that you do not pull the forks in.
Motorwiz
Motorwiz
motorwiz- Posts : 15
Join date : 2009-08-21
Norman Nippy front wheel
Thanks for your advice, it looks if I have a soft spring that allows the wheel to dive to the side when the front
brake is pulled on
Arthur
brake is pulled on
Arthur
smallbike- Posts : 3
Join date : 2013-02-12
Similar topics
» norman nippy restoration
» Info needed on my Norman B2 Sport 1958
» Norman Nippy 1957 Mk3
» Mi Val engined Mk 3 Norman Nippy
» An idiot and a Norman Nippy need help...
» Info needed on my Norman B2 Sport 1958
» Norman Nippy 1957 Mk3
» Mi Val engined Mk 3 Norman Nippy
» An idiot and a Norman Nippy need help...
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|